PG clamp is known for parallel groove clamp, especially used in transmission line to hold transmission conductors in parallel.
PG Clamp provides secure holding support for transmission conductors. PG clamps and bimetallic PG clamps are manufactured from high strength corrosion resistant aluminum alloy and use hot-dip galvanized steel bolts and nuts and corrosion protected washers.
Aluminum Copper and Bimetallic type PG Clamps
|
Model
|
Conductor Cross-section(mm2)
|
Bolts |
| CAPG-A1 | CU 6-50 AL 16-70 | 1×M8×40 |
| CAPG-A2 | CU 10-95 AL 25-150 | 1×M8×45 |
| CAPG-B1 | CU 6-50 AL 16-70 | 2×M8×45 |
| CAPG-B2 | CU 10-95 AL 25-150 | 2×M8×50 |
| CAPG-B3 |
CU 25-185 AL35-200
|
2×M10×60
|
| CAPG-C1 | CU 6-50 AL 16-70 | 3×M8×45 |
| CAPG-C2 | CU 10-95 AL 25-150 | 3×M8×50 |
| CAPG-C3 | CU 25-185 AL 35-240 | 3×M10×60 |
| CAPG-C4 | CU 35-240 AL 35-300 | 3×M10×70 |
Aluminum (AL) PG clamp
 PG clamp.png)
| Model | Conductor Cross-section(mm2) | Bolts |
| APG-A1 | AL 16-70 | 1×M8×40 |
| APG-A2 | AL 16-150 | 1×M8×45 |
| APG-B1 | AL 16-35 | 2×M6×35 |
| APG-B2 | AL 16-70 | 2×M8×45 |
| APG-B3 | AL 16-150 | 2×M8×50 |
| APG-B4 | AL 25-185 | 2×M10×60 |
| APG-C1 | AL 16-70 | 3×M8×45 |
| APG-C2 | AL 16-150 | 3×M8×50 |
| APG-C3 | AL 25-240 | 3×M10×60 |
| APG-C4 | AL 35-300 | 3×M10×70 |
Copper Extrude type PG Clamps
| Model | Bolt Torque | Conductor Range mm2 | Dimensions mm O.D | Bolts |
| CU6-70-2 | 20Nm | 6 to 70 | 2.7 to 10.5 | 2×M8 |
| CU16-95-2 | 20Nm | 16 to 95 | 5.1 to 12.5 | 2×M8 |
| CU16-150-2 | 30Nm | 16 to 150 | 5.1 to 15.7 | 2×M10 |
| CU150-240-2 | 40Nm | 150 to 240 | 15.7 to 20.3 | 2×M12 |
| CU300-400-3 | 40Nm | 300 to 400 | 22.6 to 26.7 | 3×M12 |
Send us a message if you have any questions or request a quote.Our experts will give you a reply within 24 hours
and help youselect the right valve you want.
English
Pусский
Español
